Home Page
Products
Model 100
Model
110
Model 1000|
Home Page
Products
|
| Model 100
Model
110
Model 1000 |
 | Product Summary |
| Key Features |
| Benefits |
| Controller Warranty |
[PRODUCT IMAGE]
The Model 100S "YSE" (pronounced "wise") Controller is a single axis controller for pipe and tube bending machines with sequence valves. It is designed specifically to enhance your preset machine and add capability similar to new programmable machines at a fraction of the cost. Microcomputer-based, solid state design, and user-friendly controls combine for a highly featured controller with long term reliability.
Installing and Operating a "YSE"
The Model 100S "YSE" Controller is part of a kit which includes a high resolution optical encoder, wiring harness/cable assembly, and detailed installation instructions. A complete step-by-step operator's manual includes numerous examples to help reduce learning time.
Same Features as Model 100
| Patent pending "automatic bend angle compensation" for more accurate bends | ||||||||||
| Angular resolution of 0.1 degrees | ||||||||||
| Programmable from 0.1 to 360 degrees | ||||||||||
| Program up to 99 jobs with up to 10 bends per job | ||||||||||
| Battery backed internal memory; programmed jobs remain when power turned-off | ||||||||||
| Parts counter settable for up or down counting | ||||||||||
| Job view function to view all bends with a programmed job | ||||||||||
| Over bend fixed angle compensation | ||||||||||
| Jog feature with programmable jog angle | ||||||||||
| Machine switch state automatically set at controller; no rewiring required | ||||||||||
| Operation as a 180 or 360 degree machine | ||||||||||
| Machine configuration lock out feature to prevent unauthorized changes | ||||||||||
| Programmable bend arm starting delay | ||||||||||
| Deceleration angle programmability | ||||||||||
| Two button sequence operation, forward and reverse | ||||||||||
| Operator user friendly | ||||||||||
| Controller part of complete retrofit kit
including:
| ||||||||||
| Controller kit geared for customer installation | ||||||||||
| Complete installation and operator's manual | ||||||||||
| Optional pedestals available | ||||||||||
| Offered in 110/220 VAC operation | ||||||||||
| A clean retrofit to your existing tube or pipe bending machinery | ||||||||||
| Clockwise or counter-clockwise machine configuration | ||||||||||
| Highly visible LED numeric display | ||||||||||
| Industrial grade touch panel and display with 15 function keys | ||||||||||
| Heavy duty industrial enclosure with simple disconnect | ||||||||||
| Emergency Stop safety feature | ||||||||||
| Bend arm speeds up to 50 RPM | ||||||||||
| Over-bend capability for springback allowance that are automatically added to each programmed bend of a job |
Modified Features of Model 100:
| Manual and automatic cycle operation only |
| Sequence operation (can lock out pressure die assist if not in use) |
Additional Features:
| Manual and automatic mandrel lubrication capability |
Complete retrofit kit priced as $6500
The controller will increase the efficiency, productivity with lower setup times (from a typical 30 minutes to less than 5 minutes), and profitability (through the reduction of material scrap) of your industrial pipe and tube bending machinery. The machine is designed to enhance your preset single axis, sequential valve, industrial tube or pipe bending machine by adding this fully featured automation system. It is extremely cost effective alternative to buying new equipment with an improved USER-FRIENDLY control system.
The Model 100S "YSE" Controller comes with a one year warranty covering all parts and labor. Complete factory service and technical support are available at (800) 392-1313. Fortuna Products Inc. will satisfy all your needs and questions, and above all - minimize your down-time.
Back to Top | Home Page | Products | Model 100 | Model 110 | Model 1000
